The new Metal Detector F3J is made with an aerial transmission system that is able to produce a variable magnetic field and with a reception system where the magnetic field generates induced current that is elaborated through an exchange of electric current.
The antennas' special configuration generate an even field, so they can detect the objects wherever they may be within the area surrounded by the antennas.

hanks to the modern technologies used, all of the electric components have been placed on a single card allowing to keep the dimensions and weight down.
The settings of the working parameters are obtained through a software, a special console or PC with return message, in this way it uses a modern communication request system, avoiding a direct manual maintenance on the card.
The system is completely managed by a fast microprocessor that will make a complete diagnosis in real time.
The special filter functions allow the F3J model to be free from interferences.
The possibility to change the parameter's entire range and the automatic search for the best frequency allows the F3J Metal Detector to be versatile and adaptable under any environmental condition.

• Highly Visible Double Display provides Single or Multiple Location of Weapons in Transi
• Complete Security Detection
• Very High Speed of Detection
• igh Immunity to External Interferences
• irect Selection of the International Security Standards
• igh Reliability
• ocal or Remote Programming with Networking Capabilities

The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.

A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.

HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.

The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.

The HI-PE Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

• Uniform Detection Field
• Very High Discrimination
• Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
• Fast Programming through an Exclusive Chip Card System
• High Immunity to External Interferences
• Local or Remote Programming with Networking Capabilities

PMD2, acronym for Programmable Metal Detector, is the most advanced CEIA application with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations.

A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution.

PMD2 can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a power failure.

PMD2 is available in panel (PMD2/PTZ) or column (PMD2/ENZ) version. Also an outdoor column version, PMD2/EWZ, is offered with an IP65 degree of protection.

A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The PMD2 is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

• Ultra High Sensitivity to all Metals
• ighly Visible Double Display provides single or multiple location of metal objects in transit
• Extremely High Reliability
• Very High Immunity to External Interferences
• Local or Remote Programming with Networking Capabilities

The CEIA SMD600 Multi Zone is a new-generation ultra-high sensitivity Walk-Through Metal Detector designed to satisfy the strictest security requirements, especially in penitentiaries and other applications where the detection of extremely small metal masses is required (for example: loss prevention), even if hidden in body cavities. It meets all International Security Standards currently adopted in public and private installations.

The SMD600 Multi Zone is characterised by very high immunity to electrical interference in the surrounding environment as well as mechanical vibrations; as a result, it can be installed in those environments where the standard Metal Detectors could not be installed before.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of manual searches.

The Anti-Vandalism Control Unit (IP65 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The SMD600 Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.